Product ID:OXYGUARD II, PANAVIA 21
MSDS Date:01/02/1997
FSC:NIIN:Submitter:D DG
Status Code:A
Kit Part:Y
MSDS Number: CLRKB

KURARAY CO LTD

1-12-39 UMEDA
KITA-KU OSAKA
JA

Emergency Phone: 714-544-2854

Cage: 0YCP3

KURARAY CO LTD

KITA-KU OSAKA, CA 92618 JA

Telephone: 949-581-9600

Cage: 0YCP3

GLYCERINE

CAS: 56-81-5

RTECS: MA8050000

OSHA PEL 15 MG/M3

ACGIH TLV: 10 MG/M3

POLYETHYLENE GLYCOL

CAS: 25322-68-3

RTECS: TQ3500000

SODIUM BENZENESULFINATE

CAS: 873-55-2

N,N-DIETHANOL-P-TOLUIDINE

CAS: 3077-12-1

Routes of Entry: Inhalation:UNKNOWN Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: NO ADVERSE HEALTH EFFECTS
EXPECTED. SKIN: NO ADVERSE HEALTH EFFECTS EXPECTED. INHALATION:
NO ADVERSE HEALTH EFFECTS EXPECTED. INGESTION: NO ADVERSE HEALTH
EFFECTS EXPECTED.
Effects of Overexposure:N/E

First Aid:EYE CONTACT: FLUSH WITH WATER AND CONSULT A PHYSICIAN
IMMEDIATELY. SKIN CONTACT: WASH WITH SOAP AND WATER IMMEDIATELY.
INHALATION: N/E. INGESTION: CONSIDERED AS PRACTICALLY NON-TOXIC
ORALLY. MUCODAL C ONTACT: FLUSH WITH WATER.

Flash Point:NONE
Extinguishing Media:FOAM, DRY CHEMICAL OR CARBON DIOXIDE.
Fire Fighting Procedures:DURING EMERGENCY CONDITIONS, OVEREXPOSURE TO
THERMAL DECOMPOSITION PRODUCTS MAY CAUSE HEALTH HAZARD.
Unusual Fire/Explosion Hazard:N/E

Spill Release Procedures:WIPE UP WITH PAPER TOWELS AND DISPOSE IN A
SUITABLE CONTAINER.

Handling and Storage Precautions:STORE AT NORMAL ROOM TEMPERATURE OR
REFRIGERATED.
Other Precautions:USE ACCORDING TO DIRECTIONS.

Protective Gloves:IMPERVIOUS.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:N/E
Work Hygienic Practices:USE GOOD PERSONAL HYGIENE.
Supplemental Safety and Health
ITEM IS PART OF A SIX PART KIT. SEE MSDS SERIAL NUMBERS CLRKC, CLRKD,
CLRJZ, CLRJY, AND CLRJV.

HCC:C1
Melt/Freeze Pt:M.P/F.P Text:N/E
Spec Gravity:1.06
Solubility in Water:SOLUBLE
Appearance and Odor:GREEN GEL

Stability Indicator/Materials to Avoid:YES
ALKALINE MATERIALS, METALS
Hazardous Decomposition Products:N/E
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISCHARGE IN ACCORDANCE WITH APPLICABLE
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.